BJYDJ - RUST INHIBITIVE COATING

  • MSDS: BJYDJ
  • Manufacturer: EVERSEAL MFG CO INC
  • Product Name: RUST INHIBITIVE COATING
  • National Stock Number: 8030-00-056-9522
Product Identification

Product ID:RUST INHIBITIVE COATING
MSDS Date:05/12/1987
FSC:8030
NIIN:00-056-9522
MSDS Number: BJYDJ

Responsible Party
EVERSEAL MFG CO INC
475 BROAD AVE
RIDGEFIELD, NJ 07657
US

Emergency Phone: 201-943-4986

Info Phone: 201-943-4986

Cage: 72988

Contractor
EVERSEAL MFG CO INC
RIDGEFIELD, NJ 07657-2329 US

Telephone: 201-943-4986

Cage: 72988

Ingredients

RESIN

Fraction By Weight: 17%


FISH OIL

Fraction By Weight: 11%


IRON OXIDE

CAS: 1309-37-1

RTECS: NO7400000

Fraction By Weight: 23%

OSHA PEL 10 MG/M3 (FE)

ACGIH TLV: 5 MG/M3(FE),B2; 9293


ZINC CHROMATE - AS CR

CAS: 37300-23-5

RTECS: GB3300000

Fraction By Weight: 1%


SILICA, AMORPHOUS, DIATOMACEOUS EARTH, CONTAINING LESS THAN

CAS: 61790-53-2

RTECS: HL8600000

Fraction By Weight: 6%

OSHA PEL 20 MPPCF

ACGIH TLV: 10 MG/M3 TDUST; 9293


5 G/KG

CAS: 64475-85-0

RTECS: PY8240000

Fraction By Weight: 25%


MAGNESIUM SILICATE

CAS: 14807-96-6

RTECS: VV7720000

Fraction By Weight: 11%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:INHALATION: DIZZINESS, NAUSEA,
UNCONSCIOUSNESS. IRRITATING TO SKIN AND EYES.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. APPLY ARTIFICIAL RESPIRATION
IF NECESSARY. SKIN: WASH WITH SOAP AND WATER. EYES: FLUSH WITH
WATER. CONSULT PHYSICIAN.

Fire Fighting

Flash Point:105F,41C
Lower Limits:1
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Unusual Fire/Explosion Hazard:WATER NOT SUITABLE EXTINGUISHING MEDIUM.
FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS.

Accidental Release

Spill Release Procedures:ABSORB SMALL SPILLS ON DRY ABSORPTION MEDIA.
USE SPARK-PROOF SCOOP FOR LARGER SPILLS. ENSURE ADEQUATE
VENTILATION. REMOVE OPEN IGNITION.

Handling

Handling and Storage Precautions:AVOID EXCESSIVE HEAT OR OPEN IGNITION
SOURCES.
Other Precautions:NPCA-HMIS RATING 3,2,0,H.

Exposure Controls

Respiratory Protection:VAPOR CARTRIDGE MASK OR AIR-SUPPLIED HOOD.
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN WITH CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
PROLONGED EXPOSURE TO DUST FROM SANDING, GRINDING OR BLASTING MAY CAUSE
LUNG DISORDERS. USE APPROPRIATE PROTECTION DURING THESE OPERATIONS.

Chemical Properties

Boiling Pt:B.P. Text:323 TO 390F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:43

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:CARBON DIOXIDE OR CARBON MONOXIDE ON
COMBUSTION.

Disposal

Waste Disposal Methods:AS PER LOCAL AND FEDERAL REGULATIONS FOR
HAZARDOUS WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.